https://www.selleckchem.com/pr....oducts/3-3-cgamp.htm
Afterwards, the samples were subjected to tensile tests to evaluate the shear bond strength (SBS) of the joint. Increasing the welding energy resulted in an increase in the welding time. Accordingly, the increase in the welding energy increased the surface deformation for all tested samples. The shear bond strengths ranged from 4.8±0.68MPa for samples welded with 50Ws to 16.37±1.69MPa for samples welded with 90Ws. Excessive weld energy of 130Ws led to a significant decrease of SBS due to a severe indentation and perforation induced by
Like
Comment
Share
