https://www.selleckchem.com/pr....oducts/TG100-115.htm
18-5.78 m/s and 2.15-6.18 m/s, respectively. Based on the terminal velocity of the grains and volumetric air flow rate of the blower, fluidization chamber diameter was arrived. Chamber diameter of 0.15 m was found to be sufficient to generate required air velocity of 6.89 m/s which met the fluidization and carry over velocities of popped/puffed grains. The designed fluidization chamber was analyzed for heat and mass transfer during popping/puffing. Convective heat and mass transfer coefficients were estimated to be in the range of 103
Like
Comment
Share
