https://www.selleckchem.com/pr....oducts/bsj-4-116.htm
05). Lowering the alumina content below 0.05 wt.% enhanced the translucency (p less then 0.05), but a small amount of alumina was still required to obtain full densification. 0.05 wt.% Fe was used to increase the chroma of zirconia specimens without compromising their mechanical properties. The Er-containing zirconia specimen showed a maximal fluorescence emission at 430 nm. The degree of opalescence was affected by the microstructures of ceramic materials. The microstructure, incorporation of a secondary phase, and sintering behavior
Like
Comment
Share
